|
|
 |
|
 |
| Assembly Instructions - 6510TG |
Step 1
Remove unit from box.
Step 2
Place base on level surface.
Step 3
Insert (4) four of the support legs into the base with a connector on top of each leg. Place a block of wood on top of each connector and gently tap the block with a hammer.
Step 4
Repeat step 3 with a leg and connector on top of each connector below.
Step 5
Insert final (4) four legs and gently tap in with hammer on top of a block of wood
Step 6
Place "Grow Box" on top of legs with holes in bottom of the "Grow Box". Gently tap with hammer and block of wood to fully seat "Grow Box" on support legs.
Step 7
Remove plug in base and fill base with approx. 30 lbs of play sand. Reinsert plug into base. It is important that this step is done last after all legs are installed.
CAUTION: Do not omit this important step, "Step 7" (sand in base), as a weight in the base is necessary to stabilize the unit.
Step 8
Confirm your patio garden is positioned on a level surface.
Step 9
Fill the "Grow Box" with plants and soil per planting instructions - Click Here to view planting instructions.
|
 |
|
For printable version of these instructions, please Click Here for English
Para la versión imprimible de estas instrucciones, Hace clic Aquí por favor para Español |
|
|
| Copyright © 2010, Flambeau Hardware Products a Division of Flambeau, Inc. All Rights Reserved |
|
